YOSUN Replacement Projector lamp bulb with same functioning as your original one. Perfectly match and compatible for your Projector.
FEATURES: It is the lamp with housing, not only a bare bulb. Same as bright and durable lamp wick as the original bulb.
INSTALLATION AND SAFTY: You will find it is quite easy to install it into your Projector as the ways you are taking out your old lamp. Be aware of the connector make sure it connected well.
WARRANTY AND RETURN: New replaced lamp will be shipped to you when your bulb was out of work naturally in 180 days. Refundable issue, please contacts our 24 hours/7 days customer service. It is our appreciations if you need any further assistance.
Working hours: 3500-4500 hours
Period: 180 days
Bulb Type: Bulb with Housing
PowerLite HC 3500 PowerLite HC 3100 PowerLite HC 3000
PowerLite HC 3600e PowerLite HC 3700 PowerLite HC 3900
EH-TW6600 EH-TW6800 EH-TW6700 EH-TW6600W
V13H010L85 projector lamp performs the high definition pictures like you are at the cinema.
Durable lamp life,more clear pictures makes you feel no negative effects on operating and matching your projector.
With a economical and healthy conditon when you are using it.
This is a lamp with housing, very easy and covenient for intalling.
We also offer you simple intallation guide in our product detailed description. We always be here to assist you when you got any probems.
Projector Lamp Description and Service:
It is the lamp with housing, Same as bright and durable lamp wick as the original bulb. All our projector lamps have taken strict quality checks for beam performance, connections, voltages, and run-time, so you can trust it to work flawlessly in your projection.
It is time to replace the lamp when:
The projected image gets darker or starts to deteriorate. The lamp light is flashing orange. The message Replace the Lamp appears on the screen when the lamp comes on. To maintain projector brightness and image quality, replace the lamp as soon as possible. Do not reset the lamp timer if you have not replaced the lamp. If you do, the Lamp Hours will not accurately reflect the number of hours that the lamp has been used.
Replace the lamp:
1.Turn off the projector and unplug the power cord. 2.Let the projector cool for at least an hour. The lamp is extremely hot immediately after use. 3.Loosen the lamp cover screw. Then slide the lamp cover off. 4.Loosen the two screws holding the lamp in place. 5.Hold the lamp as shown and pull it straight out. 6.Gently insert the new lamp. Then tighten its screws. 7.Replace the lamp cover, then tighten its screw.
YOSUN v13h010l85 Replacement lamp for epson elplp85 powerlite Ho